STAINLESS STEEL UNDERSLUNG COUNTERWEIGHT

CHARACTERISTIC a) Underslung 316L Stainless Steel Mass Core
b) Decoupled 6061 Aluminum Adapter
c) 6061 Aluminum Lock Nut
d) 3 x 10 g /each 316L Stainless Steel Additional Masses
e) Allen Key

COMPATIBILITY Cartridges up to 14.5 gr
Rega tonearms with metal end stub.
Tonearms with metal end stub on Rega, Goldring and NAD turntables.
Rega tonearms with plastic end stub require the addditional Metal End Stub.
Not compatible for RB110 tonearm.

ASTOR SUBPLATTER

CHARACTERISTIC Astor model subplatter (11.5 mm hub height) with silicone isolator decoupling stages.
Installation kit.

COMPATIBILITY Rega P1, RP1, P2, P3-24, Planar 2(original version & 2016 version), Planar 3 (original version & 2016 version) , Planar 5, Planar 25. Any Rega model that work with a standard height (11.5 mm) subplatter and a MDF fiber, resin, glass, acrylic or Delrin (r) platter.

ZIRCONIA HI-LUBE SUBPLATTER

CHARACTERISTIC ZIRCONIA HI-LUBE model subplatter (11.5 mm hub height) with silicone isolator decoupling stages and Vesconite Hi-Lube spindle extremity.
Installation kit.

COMPATIBILITY Rega P1, RP1, P2, P3-24, Planar 2(original version & 2016 version), Planar 3 (original version & 2016 version) , Planar 5, Planar 25. Any Rega model that work with a standard height (11.5 mm) subplatter and a MDF fiber, resin, glass, acrylic or Delrin (r) platter.

MEDEROS SUBPLATTER

CHARACTERISTIC Mederos model subplatter (11.5 mm hub height) with butyl rubber isolator decoupling stages.
Installation kit (belt and ceramic zirconia ball bearing)
Optimal for MDF/Fiber/Resin Platters.

COMPATIBILITY Rega RP1, RP2, P1, Planar 1 2016, or any Rega model that work with a 11.5 mm hub heigh subplatter and with a MDF/Fiber/Resin platter.

TROILO SUBPLATTER

CHARACTERISTIC Troilo model subplatter (17.5 mm or 15 mm hub height) with red silicone (or black EPDM) isolator decoupling stages
Installation kit (silicone belt, ball bearing)
Optimal for glass, acrylic or Delrin platters.

COMPATIBILITY Rega RP6 with TTPSU (17.5 mm) and 2017 Planar 6 & Planar 8 (15.0 mm)

MORES Upgrade Kit

CHARACTERISTIC Mederos model subplatter (11.5 mm hub height) with butyl rubber inserts.
Aluminium 33/45 pulley (optional upgrade to brass pulley).
Butyl rubber belts.
Ceramic zirconia oxide ball bearing
Optimal for MDF/Fiber/Resin Platters.

COMPATIBILITY Rega RP1, RP2, P1, Planar 1 2016, or any Rega model that work with a 11.5 mm hub heigh subplatter and with a MDF/Fiber/Resin platter.

DEL CARRIL Upgrade Kit

CHARACTERISTIC Mederos model subplatter (11.5 mm hub height) with butyl rubber inserts.
Aluminium 33/33 pulley (optional upgrade to brass pulley).
Butyl rubber belts.
Ceramic Zirconia Oxide Ball Bearing
Optimal for MDF/Fiber/Resin Platters.

COMPATIBILITY Rega RP1, RP2, P1, Planar 1 2016, or any Rega model that work with a 11.5 mm hub heigh subplatter and with a MDF/Fiber/Resin platter. Note: unless you have TTPSU you won´t have 45 RPM speed with this kit.

PUGLIESE Upgrade Kit

CHARACTERISTIC Astor model subplatter (11.5 mm hub height) with silicone inserts.
33/45 Aluminium Pulley (with optional upgrade to Brass Pulley)
Silicone belts.
Ceramic Zirconia Ball Bearing

COMPATIBILITY Rega P1, RP1, P2, P3-24, Planar 2(original version & 2016 version), Planar 3 (original version & 2016 version) , Planar 5, Planar 25.
Any Rega model that work with a standard height (11.5 mm) subplatter and a MDF fiber, resin, glass, acrylic or Delrin (r) platter.

CANARO Upgrade Kit

CHARACTERISTIC Astor model subplatter (11.5 mm hub height) with silicone inserts.
Aluminium Pulley (with optional Brass Pulley)
Silicone belts.
Ceramic Zirconia Oxide ball bearing.

COMPATIBILITY Rega P1, RP1, P2, P3-24, Planar 2(original version & 2016 version), Planar 3 (original version & 2016 version) , Planar 5, Planar 25.
Any Rega model that work with a standard height (11.5 mm) subplatter and a MDF fiber, resin, glass, acrylic or Delrin (r) platter.
Note: unless you have TTPSU you won´t have 45 RPM speed with this kit.

LAVIE Upgrade Kit

CHARACTERISTIC Troilo model subplatter (17.5 mm hub height) with black EPDM inserts.
Brass Pulley.
Black EPDM belts.
Ceramic Zirconia Oxide Ball Bearing
Optimal for glass, acrylic or Delrin platters.

COMPATIBILITY Rega RP6 with TTPSU and 2017 Planar 6.

DARIENZO UPGRADE KIT

CHARACTERISTIC Troilo model subplatter (17.5 mm hub height) with red silicone inserts.
Brass Pulley.
Red silicone belts.
Ceramic Zirconia Oxide Ball Bearing
Optimal for glass, acrylic or Delrin platters.

COMPATIBILITY Rega RP6 with TTPSU and 2017 Planar 6 and Planar 8 with TTPSU

VHL BEARING SLEEVE WITH ISOLATING DAMPER CAP

CHARACTERISTIC VHLBS: A high performance Rega compatible bearing sleeve. Vesconite Hilube has been shown to offer up to ten times the life of bronze parts. Vesconite Hilube incorporates an internal lubricant that translates into an exceptionally low friction coefficient. Combined with excellent dimensional stability, low wear rates and a high load-bearing capacity. Hilube has a PV rating (pressure x velocity) even better than other more expensive termopolymers.





















IDC: Machined from solid black Nylon, embraces and wraps the entire exposed surface of the bearing sleeve, compatible with all \"Vesconite Hi-Lube Bearing Sleeves\" models

COMPATIBILITY -All Rega turntable models.

VHL BEARING SLEEVE WITH KNURLED NUT

CHARACTERISTIC A high performance Rega compatible bearing sleeve. Vesconite Hilube has been shown to offer up to ten times the life of bronze parts. Vesconite Hilube incorporates an internal lubricant that translates into an exceptionally low friction coefficient. Combined with excellent dimensional stability, low wear rates and a high load-bearing capacity. Hilube has a PV rating (pressure x velocity) even better than other more expensive termopolymers.

COMPATIBILITY All Rega turntable models.

DELRIN - ALUMINUM PLATTER LIBERTANGO MODEL

CHARACTERISTIC COLOUR: Black & Matte-polished Aluminum OR Black Delrin & Black Matte Aluminum: Full Black Version OR White & Matte-polished Aluminum OR White Delrin & White Matte Aluminum
22.5 mm height
2400 +/- 60 G
IMPORTANT: DUE PLATTER WEIGHT PLEASE CLICK AT \"FEDEX EXPEDITED EXPRESS\" SHIPPING METHOD CHECKBOX, AT CHECKOUT. THANKS !

COMPATIBILITY All Rega Models except for P9 and P10

DELRIN PLATTER STANDARD MODEL

CHARACTERISTIC COLOUR: WHITE OR BLACK









22.5 +/- 1mm height









Weight: 2000 +/-60 g



















IMPORTANT: DUE PLATTER WEIGHT PLEASE CLICK AT \"FEDEX EXPEDITED EXPRESS\" SHIPPING METHOD CHECKBOX, AT CHECKOUT. THANKS !

COMPATIBILITY Planar 2, 3, 25 and Rega RP1, RP3, RP6 , RP40, P1, P2, P3, P25, and P3-24. New 2016 Planar 1,2,3 and 6 and compatible brands. Not for Planar 5.

LIBERTANGO PLATTER + 2024 AIR FEET SET / FREE SHIPPING BUNDLE!

CHARACTERISTIC

COMPATIBILITY

ALUMINUM PULLEY

CHARACTERISTIC SOLID 6061 ALUMINUM PULLEYS.

COMPATIBILITY EVERY REGA MODEL IN 50 OR 60 HZ POWER SYSTEMS.

BRASS PREMIUM PULLEY

CHARACTERISTIC SOLID BRASS PULLEYS.

COMPATIBILITY EVERY REGA MODEL IN 50 OR 60 HZ POWER SYSTEMS.

TRIPLE 33.3 BRASS PREMIUM PULLEY

CHARACTERISTIC SOLID BRASS TRIPLE 33.3 PULLEY

COMPATIBILITY For RP6, 2017 Planar 6 or any other Rega model or DIY project, with 17.5 mm hub subplatter. 50 and 60 Hz versions.

33/45/33 BRASS PULLEY plus 2 OPAL MODEL premium belts

CHARACTERISTIC 15 mm SOLID BRASS TRIPLE 33.3 PULLEY with 2 OPAL MODEL premium belts

COMPATIBILITY Original P2 & Planar 3.
Newest post 2016 P1, P2, P3 post 2016.
RP1.

2024 AIR MODEL - UNIVERSAL ADJUSTABLE ISOLATOR FEET SET

CHARACTERISTIC ADJUSTABLE ISOLATOR FEET SET - 2024 AIR MODEL

COMPATIBILITY Suitable to upgrade original feet set of any turntable, which are mounted to the plinth with screws or bolts up to 7.5 mm in diameter.

BOCCA UNIVERSAL ADJUSTABLE ISOLATOR FEET SET

CHARACTERISTIC BOCCA UNIVERSAL ADJUSTABLE ISOLATOR FEET SET

COMPATIBILITY Suitable to upgrade original feet set of any turntable, which are mounted to the plinth with screws or bolts up to 7.5 mm in diameter.

CLEAR SILICONE OPAL MODEL PREMIUM DRIVE BELTS (3 units)

CHARACTERISTIC CLEAR PURE SILICONE BELTS.

COMPATIBILITY Every Rega model.

CLEAR SILICONE OPAL MODEL PREMIUM DRIVE BELTS (2 units)

CHARACTERISTIC CLEAR PURE SILICONE BELTS.

COMPATIBILITY Every Rega model.

RED SILICONE HQ DRIVE BELTS (3 units)

CHARACTERISTIC Red Silicone HQ drive belts for 50 or 60 Hz Rega Turntables.

COMPATIBILITY Every Rega model. 50 and 60 Hz versions

RED SILICONE HQ DRIVE BELTS (2 units)

CHARACTERISTIC Red Silicone HQ drive belts for 50 or 60 Hz Rega Turntables.

COMPATIBILITY Every Rega model. 50 and 60 Hz versions.

RECORD CLAMP

CHARACTERISTIC Weight-based Pressure-based record clamp.

COMPATIBILITY Every Rega model and every other turntable brands, even with straight arms. They need to have no more of 20 mm of plain spindle portion protruding from LP surface. Not for use on threaded spindles.

RECORD CLAMP + 2024 AIR FEET SET BUNDLE

CHARACTERISTIC

COMPATIBILITY UNIVERSAL. COMPATIBLE WITH ALL TURNTABLES.

DELRIN 1.5 CENTERER WASHER

CHARACTERISTIC DELRIN 1.5" CENTERER WASHER (Note: Record Clamp Not Included)

COMPATIBILITY EVERY 7" SINGLE VINYL RECORD WITH 1.5" HOLE.